Wrought Iron Fence in Lubbock, TX

Ornamental iron for front yards, pools and side gates: steel, aluminum or true iron, and what each costs per foot.

Free to use
One local company, not a list
No obligation to hire

Referral website, not the contractor. How it works

A wrought iron fence can be true iron, ornamental steel or aluminum, and HomeGuide puts installed prices at about $50 to $85 per foot.

Lubbock Fence Install is a referral website, not a fence company. We send your request to one independent local fence company. You never pay us; companies we refer you to may pay us for referrals. For an iron fence price, send a request with the form.

"Wrought iron" today: three different metals

Many fences sold as "wrought iron" are ornamental steel or aluminum. Ask which of these you're being quoted:

Material	What to know	National installed price
Ornamental steel	The common choice; HomeAdvisor says steel simulates wrought iron for a fraction of the price, but scratches can rust	About $15 to $60 per foot (Fixr)
Aluminum	Lighter and doesn't rust; Fixr notes styles that mimic wrought iron; HomeAdvisor says it can last up to 50 years	About $15 to $40 per foot (Fixr)
True wrought iron or custom work	Heavy, welded, made to order	Custom ornamental runs about $85 to $130 per foot (HomeGuide)

HomeGuide breaks the common styles down further: plain black about $50 to $60 per foot, galvanized $60 to $65, and ornamental designs with twisted pickets or scrolls $65 to $85, mostly in the 4- to 6-foot range. The guides measure differently, which is why their ranges overlap. Compare written quotes for the same height, picket spacing and finish.

Steel or aluminum?

For most homes the real choice is between ornamental steel and aluminum. HomeAdvisor describes them this way:

Aluminum needs little maintenance, resists corrosion and rust, and has a modern look and a long lifespan.
Steel is low-maintenance and gives the look of wrought iron for much less, but it scratches and can rust where the coating is damaged.

If kids, dogs or a riding mower will bump the fence, ask the company how each material holds up to dents. If rust worries you more, aluminum resists it.

Why open metal works in Lubbock wind

An iron fence is mostly air. Wind passes between the pickets instead of pushing on a solid face, so the posts carry much less load than a 6-foot privacy fence.

What iron doesn't give you is privacy. If you want a screened backyard and an open front, some homeowners pair a wood privacy fence in back with iron across the front and at the side gates.

Where iron fences go

Front yards. Low iron fences frame a yard without blocking the house. HomeAdvisor says 4 feet is the most common wrought iron height. Front-yard height is set by the city, so confirm the limit before ordering.
Corner lots. City of Lubbock permit guidance says no fence may extend into the public right-of-way or the 25-foot vision-clearance triangle at intersections. An open iron fence still counts as a fence, so keep it out of the triangle.
Pools. The Texas Department of Insurance notes that many insurers and city ordinances require pools to be enclosed by a fence and a locking gate. Ask the company and City of Lubbock Building Safety (806-775-2087) about pool barrier rules before you pick a design, especially picket spacing and gate latches.
Driveways. Iron or steel is the usual material for a rolling or swing driveway gate. See gates.

Rust, hail and upkeep

Steel rusts wherever the coating breaks. HomeAdvisor notes that wrought iron and steel fences can both rust and dent. Hail is a real factor here: the National Weather Service documented baseball-size hail in parts of south-central Lubbock on May 20, 2020. Hail can chip paint and dent hollow post caps and rails.

Ways to keep a metal fence looking right:

Ask whether the steel is galvanized under the paint or powder coat. HomeGuide prices galvanized fence a little higher and notes that the zinc coating protects the metal from rust.
Touch up chips and scratches with matching paint before rust spreads.
Keep sprinklers off the fence where you can; constant wetting speeds up rust at the base.
Check post bases each spring. Rust at the ground line is the spot that fails.

What an iron fence costs

HomeAdvisor puts typical wrought iron projects at $1,421 to $5,138, about $3,171 on average, with materials alone at $25 to $35 per foot (checked October 2026). HomeGuide notes that a wrought iron gate runs about $200 to $650 for materials alone, before installation. Removing an old fence adds about $3 to $5 per foot, including disposal (HomeAdvisor).

Prices rise with height, heavier pickets, decorative tops, custom welding and the number of gates. The Lubbock fence cost guide compares iron with wood, chain link and pipe for the same lengths.

Questions to ask before you sign

Is this steel, aluminum or true wrought iron?
What's the picket spacing and the gauge of the pickets and rails?
Is the finish powder coat or paint, and is the steel galvanized underneath?
How are posts set: in concrete, and how deep?
What warranty covers the finish, and what does it exclude? Get it in writing.
Is the old fence removal and haul-off included?

Want privacy instead? Compare a wood privacy fence. Need a budget option for a side yard? Look at chain link. More answers are in the fence FAQ.

Common questions

Is wrought iron fencing cheaper than wood?

Usually not. HomeAdvisor puts typical wrought iron projects at $5,250 to $11,400 and wood at $2,100 to $9,400 (national, checked October 2026). Ornamental steel or aluminum made to look like iron narrows the gap.

What is a cheaper alternative to a wrought iron fence?

Ornamental steel or aluminum gives the same look for less, and HomeAdvisor says steel lets homeowners simulate wrought iron for a fraction of the price. Black vinyl-coated chain link is cheaper still, though it looks utilitarian.

Will an iron fence rust in Lubbock?

Any steel fence will rust where the coating is scratched or chipped. HomeAdvisor notes both wrought iron and steel fences can rust. Ask whether the panels are galvanized under the paint or powder coat, and touch up chips as they appear. HomeAdvisor describes aluminum as rust-resistant.

How tall should a front-yard iron fence be?

HomeAdvisor says four feet is the most common height for wrought iron. Front-yard height is regulated by the city, so check the limit for your lot with City of Lubbock Building Safety at 806-775-2087 before you order.

Sources (7)

Last updated 2026-10-23